Some boards have three fins to help you bite deeper into the wake. Other boards may have five or more fins.
The more fins your board has, the better it can handle itself in the water and turn tighter. So, if you want to go faster, there are more fin options for you to choose from.
There are few things that will break or damage a fin. If you happen to knock one off of your board, here's how to fix it: Get out a file, some metal polish, and some time. It's not easy to repair plastic, but with enough effort anything is possible. When you're done, be sure to put a drop of oil on the spot where the fin was attached before putting it back on the board.
Fins are the most important part of your wakeboarding gear. Without them, you would be unable to turn, stop, or do any kind of maneuver in the water. Fins also give you extra control over your board so you can do all kinds of crazy tricks.
However, they are very sensitive pieces of equipment. If you get hit by another rider or fall into the water, you could possibly damage a fin.
Without the fins, the wakeboard is far more likely to violently and freely rotate on the water's surface, making riding the board, much alone doing tricks, exceedingly impossible. There are many different types of specialized fins available, but in general, they are divided into two categories: broad and thin. Broad fins have more surface area and can be used for larger-scale maneuvers such as double-dips. Thin fins are better suited for smaller jumps and tricks.
The main purpose of the fin is to guide the wakeboard in a desired direction while also providing stability during turns and jumps. Thicker, more flexible fins are preferable for tricking while thinner, less flexible fins are best for cruising around the lake. Fins can also help reduce drag when sailing down the road with the wind behind you. Of course, if you want to go fast, you need a big fin!
Of course, you can still have fun even without fins by doing simple tricks like kickers or flips. However, because there is no fin to stabilize the board, these tricks are done at a very high speed which may not be safe for everyone. If you're new to wakeboarding, we recommend starting out with fins so that you can learn how to ride the board properly before removing them. Once you feel comfortable jumping off the ramp without the aid of fins, then you can think about removing them for regular riding.
I ride with the middle fin removed and rely on the molded-in fins on the corners to keep my edge. It aids in a better release in the aftermath.
Fins function similarly to a boat's rudder in that their location maintains the board going in a controlled, forward direction, which is what you desire. Without the fins, the wakeboard is far more likely to violently and freely rotate on the water's surface, making riding the board, much alone doing tricks, exceedingly impossible.
While your board is stowed and the boat is in motion, a fin can break. Without fins, your wakesurf board becomes practically impossible to ride. However, this does not mean that you should goes surfing with zero fins! There are several methods for waking up a finless board.
The first thing you should do is wakeboard downwind (away from the wind) until the board starts spinning. Once it starts spinning, pop off one of the fins and watch it fly away. Now your board is spineless but still has its tail section, so you can use it as a normal wakeskate.
You can also try throwing a fin at the board. This will work only if you can find a fin that is close by or if you have a spare one with you.
Last but not the least, you can use an empty water bottle as a fin. First, remove the label from the bottle and cut it into several pieces. Next, wrap each piece around your finger and throw them at the board. If they connect with the water in the correct spot, then you will see more edge when riding downstream.
These are just some ideas. The main thing is that you need to be able to turn your board when it is stowed.
Most surf-style wakesurf boards come with three fins as standard. This is referred to as a "thruster" fin configuration. The outside fins contribute to down-the-line speed, while the central fin provides stability and control. Modern thrusters are generally made of fiberglass and can be painted or stained any color for visual appeal. They usually measure between 22 and 28 inches in length and have a maximum blade width of about 7 inches.
Wakesurf fins are identical to regular surfboard fins with the exception that they are flat instead of curved. This allows for more versatility when it comes to surfing conditions. For example, if you want to go fast on a wave but not get washed off its face, you can deploy your wakesurf fins at an angle instead of fully extended.
The most important thing when it comes to wakesurfing fins is proper size. If you choose fins that are too small, they will not provide enough surface area for effective propulsion. This could cause you to fall back on your board instead of using your fins. On the other hand, if they are too large, they will just get in the way when you need to maneuver around waves or into different positions.
There are many different brands of wakesurf fins out there, so make sure to buy ones that fit your needs.