Skateboard gear, also known as mounting hardware, is used to attach skateboard trucks to skateboard decks. The two most common types of gear are urethane bushings and metal bearings.
Urethane bushing gear is used by itself or in combination with other gear types. It consists of an aluminum center rod with plastic end caps attached to each end. The rod is inserted into the center of the deck, and then the cap ends are threaded onto it. The purpose of this type of gear is to provide a way to connect the board to your truck while still allowing some movement between them. This type of gear is commonly found on cheap boards that you can buy at any store that sells skateboards.
Metal bearing gear is very similar to urethane bushing gear except that instead of using rubber, it uses metal balls. These balls are held in place by a steel housing that is attached to the board with bolts. The bearing balls allow the board to move back and forth while keeping its shape intact. Because metal balls need lubrication, most metal-bearing skates have holes drilled into their bases through which water or oil can be poured to keep the balls rolling smoothly.
Some boards use more than one type of gear combined together.
Skateboard trucks are the axle assemblies that link the wheels to the deck and allow the board to turn. Skateboard bearings are circular metal discs that go into the wheels and connect them to the axle. Knobs or pins attach the wheels to the axles.
The four wheels of a skateboard each have a hole in which to place a bearing. The holes can be of different sizes, but generally speaking, the smaller the hole, the faster the wheel will spin. There should be about 1/4 inch space between the outer edge of the bearing and the inside wall of the truck's casing. This is called the width of the bearing pad and it is here that you will see people vary their choice of words when describing the type of skateboard they have. Some will say they have "polyurethane" bearings while others may say they have "ball bearings." These are both correct statements because most modern skateboards use both types of bearing to provide flexibility in what they can ride on. Although polyurethane has many advantages over rubber, such as being more durable and having better traction, it cannot be used at temperatures below 32 degrees F since it will harden up.
As for the type of bearing used, this would be called a radial ball bearing. It works by using balls that roll within a cylindrical casing.
The discs' inner and outer edges ride on inside balls, allowing the wheels to revolve. Skateboard hardware consists of the nuts, bolts, and screws that hold trucks to the board.
The trucks are the lengthy metal shafts on the board's bottom that connect the wheels to the deck (the wooden platform you stand on). Each foot should be placed over the bolts on the top of the board that hold the trucks in place. Don't allow your feet stretch too far apart or come together in an overly tight posture.
The majority of skateboards are comprised of numerous planks of wood glued together. The skateboard deck is composed primarily of maple wood. The modest four wheels beneath the skateboard allow you to maneuver around easily. Fiberglass, Plexiglas, aluminum, and other materials are sometimes used to build them.
Skateboards were first created in California in the 1970s by several independent inventors who went by the names Tony Alva, Paul Van Der Zalm, and Tom Jenkins. Since then, many others have also invented their own versions of the device they called a "roller skate." Today, there are more than 100 different types of skateboards for people of all ages, sizes, and abilities to enjoy. Which one will you get?
The type of wood that your board is built from affects its weight, price, and durability. If you're looking for a cheap board, you should probably go for a plastic one instead. But if you want to save some money but still want a high-quality board, look for a wooden one.
There are many different kinds of wood that can be used to make a skateboard. The most common ones are pine, maple, bamboo, and oak. Each one has its advantages and disadvantages. Pine is very flexible and lightweight but it tends to crack when dried out. Maple is strong and durable but heavy. Bamboo is very flexible and lightweight but it can rot if not treated properly.
Skateboard hardware is what holds your trucks to your skateboard deck and is necessary for your setup. It's easy to make mistakes when selecting hardware, so we put up this guide to assist you make sure you're using the proper bolts for your system. How long should the hardware on my skateboard be? The length of your hardware depends on how old your board is and what brand it is. Older boards may have 5/8" or 3/4" bolts, while newer ones usually use 7/16" or 1/2" bolts. If yours is older then you should go with the longer bolt version.
Hardware stores sell all different types of bolts, but here are the most common ones used on skateboards:
5/8" x 25-30 threads per inch (TPI): Used on older boards that are still available today. These boards use 5/8" bolts that go all the way through the deck and the truck. They are easier to install but take more time to drill because there are no partially drilled holes like on newer boards.
7/16" x 28-31 TPI: Newer boards use these bolts which only go partway through the deck and the truck. This allows for faster assembly and less drilling required.
1/2" x 36-39 TPI: Most modern boards use these bolts which go all the way through the deck and the truck.
A skateboard is a term that refers to a thin, wooden or plastic deck with pairs of wheels on which one stands and pushes oneself by pushing along the ground with one foot. The other foot is used for balancing oneself.
The word "skateboard" came from the name given to the equipment used by surfers before it was invented by Rodney Mullen in 1975. He called his invention "sidewalk surfboards".
You can say that skateboarding is a form of recreational activity that uses a board with metal wheels attached to its bottom surface and a set of plastic or rubber boots attached to its top surface. This allows the rider to walk up any slope or curb without falling off because the ankle support provided by the boots prevents them from slipping out from under him. Skateboards are commonly used by children but also have many adult users who enjoy playing this sport at parks where they won't be hurt if they fall.
There are many types of skateboards, depending on the purpose for which it is being used: cruiser boards are designed for cruising around town, while vertigo-inducing boards are designed for doing tricks at high speeds. There are also hybrid boards that combine the two purposes.