It is strongly suggested not to ride a skateboard outside in the rain or while it is wet. The bearings will degrade from inside, the grip tape may peel and lose grip, and the deck may lose its pop and become waterlogged or delaminated.
However, if you must, there are several things you can do to make sure your board is safe for riding:
• Make sure your board is clean. Dirty wheels cause dirty rides. • Don't go straight into a headwind. Give your board time to dry out before going back out again. • If it's wet outside, don't walk around on hot spots. This will only heat up the surface of the board and cause it to warp.
• Never ride under the influence of drugs or alcohol. It's not worth the risk!
Have a look at our Skateparks across America to find out where you can ride today!
Water corrodes bearings, boards, trucks, and fasteners. Furthermore, you may encounter hydroplaning, which may impair your ability to control the skateboard. So, avoid skating in the rain or in puddles. But if your skateboard does get wet, just follow the methods above and you'll be OK.
Skating boarding on wet or rainy surfaces is detrimental to the deck of the board because it absorbs water and warps the wood. You should never leave a soaking wet skateboard lying around. Always dry it off right after, and consider using a hair dryer if necessary. Skateboards are very sensitive instruments that can be ruined by even a small amount of moisture.
The best thing you can do for your board is to take good care of it. Use only official skateboard truck parts, and keep plastic bags in your trunk in case any parts get loose. When not in use, store your board inside.
Make sure there are no weeds growing under the board. This will create problems when you need to change direction fast, since you'll have to jump over the plant. Keep an eye out for nails or other dangerous objects that may be buried in the ground. If you see anything unusual, stop skating immediately until you've removed the danger.
Finally, watch out for your own actions when skating. If you're not careful, you may get injured. Make sure to wear appropriate safety gear such as helmets and protective pads.
It will be destroyed if you do not take care of your board and do not repair it after riding in the rain. If you do not allow your board to dry, it will get waterlogged, making the wood of the deck brittle and prone to warping. Rusted bearings: Just like you may destroy your board, you can also harm your bearings. If your board is covered in mud, try to wash it off before putting it in a garage or other area where it will be exposed to heat or sunlight.
The best thing to do with a wet board is to let it air-dry. This might take several days depending on the temperature and humidity outside. If you cannot wait that long, put it in a cool, dark place so it does not attract any insects.
When it is dry, have a look at the underside of the board. Any spots of brownish color should be sanded down. You should also check the wheels for wear. If they are looking pretty grim, it might be time to replace them.
Overall, keeping your board in good condition will make it last longer. Also, be sure to use caution when riding in the rain! It can happen at any time of year, but it's especially important to be aware of your surroundings when there's moisture around.
Copyright © 2020 - 2023 Sportsmanist Inc.
